Home › Commercial Gates and Access Control
Legendary Fence Company Bakersfield installs commercial gates and access control systems in Bakersfield, CA, to manage vehicle and pedestrian entry. We provide sliding and swing gates, gate operators, keypads, card readers, and safety devices that integrate with your security fence. Our team designs reliable gate systems that keep traffic moving while maintaining control over who enters your property.
Legendary Fence Company Bakersfield provides professional commercial gate installation throughout Bakersfield, CA, California and the surrounding area. Our licensed, insured crew delivers safe, clean, on-time work with a free estimate before anything begins. Call 661-220-7146 or request your free quote.
Commercial Gate Installation for Bakersfield Businesses
Commercial gates and access control systems are first and foremost about controlling who can get in, when, and how. At Legendary Fence Company Bakersfield, we design and install commercial gate systems that fit the way your business actually operates, not a one-size-fits-all package. We handle everything from a simple swing gate with a keypad to fully automated sliding gates tied into card readers and camera systems.
When we visit your property, we start by walking the perimeter with you and talking through your traffic patterns. We look at where delivery trucks enter, where employees park, how customers arrive, and any existing fencing or bollards. For Bakersfield properties, we also pay attention to wide drive approaches that are common around industrial and ag operations, and the dust and heat that can be hard on motors and electronics. Those local conditions help us decide what type of gate, hardware, and access controls will hold up over time.
Commercial gate installation typically involves setting steel posts in concrete, fabricating or installing the gate frame, mounting the operator, running low-voltage wiring in conduit, and integrating access control devices. We make sure clear opening widths match your largest expected vehicle, including fire and waste trucks, and we plan for emergency manual release so you can still operate the gate if power or electronics fail. Everything we recommend is based on actual use, so a small office park does not get the same setup as a busy trucking yard.
Gate Types, Materials, and Hardware Options
Commercial properties in Bakersfield use a range of gate styles, and each has its pros and cons. Slide gates are popular for tight sites or where a swinging gate would block parking or traffic. These roll along a track or on cantilever hardware, which means they stay off the ground and work well over uneven or dirty approaches. Swing gates are a good fit when there is enough room for the panels to open inward and when the concrete or asphalt is in good shape.
For materials, most commercial gate frames are built from steel or aluminum. Steel is strong and cost effective, good for warehouses, yards, and industrial locations. Aluminum costs more but resists rust better, which can be helpful around irrigation, dairies, or food processing facilities. Infill options include chain link for visibility and airflow, square pickets for a more finished look, or solid panels if you need more privacy. Legendary Fence Company Bakersfield can match your new gate to existing chain link or ornamental fencing so the property looks consistent.
Hardware and accessories make a big difference in long-term performance. In Bakersfield, we avoid light-duty rollers or cheap hinges that do not hold up under dust, wind, and heavy use. We often recommend sealed-bearing rollers, adjustable heavy-duty hinges, and guide posts or catch posts that keep large gate leaves aligned. For high-use entry points, we might suggest an industrial slide operator with a higher duty cycle, so the motor does not overheat during peak traffic hours. We will explain each option with installed cost and maintenance expectations so you can choose based on facts, not guesswork.
Access Control Systems and How They Work
Access control is what turns a basic gate into a tool that manages your property. Common options for Bakersfield businesses include keypad entry, card or fob readers, telephone entry systems, and radio remotes. Many sites use a mix of these. For example, a keypad for vendors and after-hours access, proximity cards for employees, and remote transmitters for supervisors or fleet vehicles.
When we design an access system, we start with your rules. Who should be able to get in, are there different groups or schedules, and do you need an audit trail of who entered and when. Simple stand-alone keypads store codes locally and are fine for small operations. Networked access controllers can link to your office network, which allows you to add or remove users from a computer and sometimes even from a phone app.
We also address safety and code requirements. This usually includes installing vehicle loop detectors in the driveway to prevent the gate from closing on a car, and photo eyes or safety edges to reverse the gate if anything is in the way. For many Bakersfield properties, we connect the gate operator to the fire department Knox system or a strobe sensor, so emergency crews can open the gate quickly. We can also coordinate with your existing security company if you want the gate tied into cameras or an alarm panel.
Legendary Fence Company Bakersfield runs all low-voltage wiring in conduit where possible to protect it from sunlight, weed trimmers, and vehicle traffic. We seal junction boxes against dust and heat and place control equipment where it can be serviced without blocking traffic. Before we leave, we train your staff on daily operation, how to use manual release, and what basic checks to do if a keypad or operator is not responding.
Local Codes, Permits, and Cost Factors in Bakersfield
In Bakersfield and Kern County, certain commercial gate installations require permits, especially if they affect fire access or are part of a new commercial build. While many simple retrofits on existing driveways proceed without a building permit, projects that add new electrical runs, change fire lane access, or are tied to new construction plans may need review. Legendary Fence Company Bakersfield can coordinate with your general contractor, architect, or directly with local authorities to confirm what paperwork is needed for your specific site.
Fire access is a major local concern. Driveway width, turning radius for ladder or pumper trucks, and clear opening height can all come into play. If your property is in a business park or industrial subdivision, your CC&Rs or HOA rules may also specify fence heights, materials, and where gates can be placed. We review those rules with you so you do not end up installing a gate that violates park standards or tenant lease terms.
Costs for commercial gate installation can vary widely, but the main drivers are gate size and type, operator grade, complexity of access controls, trenching or boring needed for power and data, and any concrete or asphalt work. A basic manual chain link swing gate might be fairly inexpensive. A long cantilever slide gate with an industrial operator, loop system, keypads at both entry and exit, and integration with a card reader system will cost more, largely due to equipment and electrical work. We provide itemized estimates that separate the gate structure, operator, access control devices, electrical runs, and optional add-ons. That way you can decide what to install now and what to plan as a later upgrade if budget is tight.
Installation Process, Maintenance, and Troubleshooting
A typical commercial gate installation in Bakersfield starts with layout and excavation. We mark post locations, call in utility locates if we will be digging deeper than a foot or crossing public easements, then excavate post holes and any trenches for conduit. Posts are set in concrete with the correct height and alignment to support the gate. While the concrete cures, we often fabricate the gate frame or prep prefabricated sections, and set up the operator pad and junction boxes.
Next, we hang the gate and install the operator and hardware. This includes mounting rollers or hinges, adding stops, guide rollers, and any locking hardware. We run conduit for electrical power and low-voltage lines, install loop detector saw cuts in the driveway if included, and mount keypads, card readers, or other entry devices on posts at practical heights for drivers. We then power up the system, program travel limits, set safety reversal forces, and configure access devices with the codes or cards you want.
Before sign-off, Legendary Fence Company Bakersfield performs multiple test cycles with different scenarios: car approaching and stopping on the loop, pedestrian walking through, manual release, power outage simulation, and emergency access. We label disconnects and provide basic instructions so your team knows what to do if something is not working.
After installation, routine maintenance keeps the system reliable in Bakersfield conditions. This typically includes lubricating hinges or rollers, checking chain tension on operators, cleaning dust from photo eyes, clearing debris from tracks, and confirming that loops and safety devices still respond correctly. Many issues we see are simple, like a blocked photo eye, a worn-out gate stop, or someone hitting a keypad pedestal with a truck. We offer maintenance plans and also provide clear instructions for what your staff can safely check themselves before calling for service. When repairs are needed, we can usually source compatible parts or upgrade old components so you do not have to replace the entire system.
